Fiat 500 Owner's Handbook Manual page 111

Side
IMPORTANT The intervention must be
carried out taking all precautions
necessary to avoid damaging the
bodywork (use a sufficiently rigid and
appropriately thick plastic card).
To change the bulb, proceed as
follows:
❒ lever the lens off, by initially applying
force from the front towards the
back (1-fig. 95);
❒ lever in the opposite direction, by
applying force from the back part
(2-fig. 95) and remove the unit;
95
❒ turn the bulb holder anticlockwise,
extract the clipped bulb and
replace;
❒ refit the bulb holder in the lens, then
reposition the unit, ensuring that the
fastening clip clicks into place.
FOG LIGHTS
(for versions/markets, where provided)
For bulb replacement, contact a Fiat
Dealership.
REAR LIGHT CLUSTERS
To change a bulb, proceed as follows:
❒ open the tailgate;
❒ unscrew the two fastening screws
A-fig. 96 and extract the light cluster
axially without rotating it;
❒ remove the bulb holder from its
housing releasing it from the locking
tabs B;
❒ extract the bulbs by pushing them
slightly and turning them
DVDF0S0117c
anticlockwise.
96
The bulbs are arranged as follows in
fig. 97:
C: side/brake lights;
D: direction indicators.
97
DVDF0S0199c
DVDF0S0200c
109