Fiat 500 Owner's Handbook Manual page 109

DIPPED BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protective rubber cap
described previously;
❒ press the fastener A fig. 92 and
remove the bulb holder;
92
❒ remove the snap-fitted bulb and
replace;
❒ refit the bulb holder locking it
correctly;
❒ refit the rubber cap.
DIPPED BEAM
HEADLIGHTS
(POP versions excluded)
To change the bulb, proceed as
follows:
❒ remove the protecting rubber cap
mentioned above;
❒ disconnect the central electric
connector A fig. 92a and release the
bulb holder catch;
❒ remove the bulb and replace it;
❒ reattach the bulb in its seat the
reconnect the connector;
❒ refit the plastic cap turning it
clockwise.
DVDF0S0118c
92a
With gas discharge
bulbs (Xenon)
(for versions/markets where provided)
Contact a Fiat Dealership.
MAIN BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protective rubber cap
described previously;
❒ release the two bulb holding clips
A fig. 93;
❒ remove the bulb and replace it;
❒ fit the new bulb, making the outline
of the metallic part coincide with the
grooves on the reflector, then
reattach the bulb holding clips;
❒ refit the rubber cap.
DVDF0S0197c
93
DVDF0S0119c
107