HP VR Backpack G2 Maintenance And Service Manual page 28

3. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
IMPORTANT:
touch the components on a memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Reverse this procedure to install a memory module.
IMPORTANT:
the bottom memory socket.
20 Chapter 5 Removal and replacement procedures
To prevent damage to a memory module, hold the module by the edges only. Do not
Memory modules are in a stacked configuration. If only one module is installed it must be in