Fans - HP VR Backpack G2 Maintenance And Service Manual

Fans

Table 5-2 Fan description and part number
Description
Fan kit (includes graphics fan and memory fan)
The computer houses two separate fans – one graphics fan and one memory fan.
Before removing the fans, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover (see
Remove the fans:
1. Graphics fan: Remove the Phillips M2.5 × 6.5 screw (1), and then remove the eyelet from the graphics
fan (2).
2. Remove the two Phillips M2.5 × 4.5 screws (3) that secure the graphics fan to the computer.
3. Disconnect the fan cable from the system board (4), and then remove the graphics fan from the
computer (5).
4. Memory fan: Remove the Phillips M2.5 × 4.5 screw (1), and then remove the eyelet from the memory
fan (2).
5. Loosen the two captive Phillips screws (3) that secure the memory fan to the computer.
16 Chapter 5 Removal and replacement procedures
(Preparation for disassembly on page
Top cover on page 14).
Spare part number
L05349-001
14).