Control Panel Of Programmable Models - Southbend Marathoner Gold ES/20SC Operator's Manual

E C
LECTRIC ONVECTION

Control Panel of PROGRAMMABLE Models

Time Display
Displays remaining cook time for
the running program.
Programs Indicators
One of these indicators will be
displayed indicating which program
is running.
Time Knob
Turn to set the desired cook time.
Start Timer Button
Press to start a timed cook period,
or to start a recorded program.
Fan Speed Button
Press to select whether fan runs at
high or low speed.
Hold Mode Button
Press to select whether oven enters
Hold Mode at end of cook time(s).
Fan Mode Button
Press to select continuous or
cycling fan mode.
Programming Buttons
Use to record cook programs. See
instructions on next page.
O
PERATOR
O
VENS
ON
OFF
TIME
START
TIMER
COOK
HI/LO
FAN
HOLD
FAN
CON/CYC
PGM
MODE
ON/OFF
' M 1181958
S ANUAL
Power Switch
Use to switch oven on or off.
Heat-On Indicator
Lit when the burners are operating.
POWER
Temperature Setpoint Display
HEAT ON
Indicates temperature setpoint.
Flashes until setpoint is reached.
Fan Speed Indicator
Indicates whether fan speed is set
to high (COOK) or low (ROAST).
Fan Mode Indicator
Indicates when fan mode is set to
CYCLE rather than continuous.
TEMP
Hold Mode Indicator
Indicates that a Hold Mode has
been programmed.
Temperature Knob
Turn to set the desired cooking
ACTUAL
temperature.
TEMP
Actual Temperature Button
PGM
3
Press to display the actual interior
oven temperature instead of the
PGM PGM
desired temperature.
1 4
PGM PGM
2 5
Program Buttons
Press to select the corresponding
recorded program, then press the
EVENT
CANCEL
#
Start Timer button. Also used when
recording a program to specify
which program to record.
Cancel Button
Press to cancel a running program,
to silence the alarm that occurs
when a timed cook ends, or to exit
Hold Mode.
Oven Interior Light Switch
Press to turn on the oven interior
LIGHTS
light. Light remains on for as long
as the switch is held.
O
PERATION
P 27
AGE