Installation Of Optional Open Pan Storage - Southbend Marathoner Gold ES/20SC Operator's Manual

E C
LECTRIC ONVECTION
Step 4a: Installation of Optional Open Pan Storage on SilverStar Ovens and on
Marathoner Gold Ovens Built After January 1, 2002
The following describes how to assemble the optional open pan storage for SilverStar ovens and for
Marathoner Gold ovens built after January 1, 2002. All holes are pre-drilled for the provided screws.
1. Attach the legs to the oven as described in installation Step 2a on page 9.
2. Attach the two frame hangers (items "A" in the following drawing) using four screws for each hanger.
The flange-side of each hanger must be on the side of the hanger closest to the edge of the oven.
A
3. Attach the pan-stop to the shelf by first inserting the tab on the bottom of the pan-stop through the slot
near the rear of the shelf, then tilting the pan-stop up to a vertical position (as shown in the following
drawing). Secure the pan-stop with a screw that passes through a hole in the shelf and into a threaded
hole on the tab of the pan-stop (do not fully tighten this screw yet). Position the shelf below the oven
(for ovens with casters, rest the shelf on the top of the caster flanges, as shown below).
Pan-Stop
O
PERATOR
O
VENS
LEGS NOT SHOWN
' M 1181958
S ANUAL
A
Side View
Install legs first!
Pan-Stop
Shelf
Side of Shelf
Shelf
I
NSTALLATION
A
Bottom View
Pan-Stop
Tab
P
AGE
15