C GETTING STARTED
, BATTERIES
•
Your beard trimmer requires 2 'AA' alkaline batteries (first set included). We
recommend that you use VARTA® batteries.
•
Turn the appliance off.
•
Open the battery compartment by pressing in the ridged areas and pulling
downward.
•
Insert batteries so that the (+) and (-) marks on the batteries face the same
marks in the battery compartment.
•
Non-rechargeable batteries are not to be recharged.
•
Different types of batteries or new and used batteries are not to be mixed.
•
Batteries are to be inserted with the correct polarity.
•
Exhausted batteries are to be removed from the appliance and safely
disposed of.
•
If the appliance is to be stored unused for a long period, the batteries should
be removed.
•
The supply terminals are not to be short-circuited.
•
To remove the batteries, slide open the battery compact cap on the base of
the groomer.
F INSTRUCTIONS FOR USE
, BEFORE YOU BEGIN
•
Always comb your beard or moustache with a fine comb before you start
trimming.
, ADJUSTING THE TRIM LENGTH
•
The trimmer comb can be adjusted to give you 6 different trim lengths.
Comb Position
1
2
3
4
5
6
4
Cutting Length
1.5mm
4.5mm
7.5mm
10.5mm
13.5mm
16.5mm