New Holland L180 Repair Manual page 9

(F) Service data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices,
•
components and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by
a letter A, B, C etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes,
excavators, skid steers, .....
Combines, forage harvesters, balers, .... X X X X X X X X X X
Seeding, planting, floating, spraying
equipment, ....
Mounted equipment and tools, .....
Chapters
Each Chapter is identified by a letter and number combination e.g. Engine B.10.A The first letter is identical to the
Section letter i.e. Chapter B.10 is inside Section B, Power Production.
CONTENTS
The Chapter Contents lists all the (D) technical data (specifications), (C) functional data (how it works), (F) service
data (remove, install adjust, etc..) and (G) diagnostic data (fault codes and troubleshooting) that have been written in
that Chapter for that function or system on the machine.
Contents
TECHNICAL DATA
ENGINE ­ General specification (B.10.A ­ D.40.A.10)
FUNCTIONAL DATA
ENGINE ­ Dynamic description (B.10.A ­ C.30.A.10)
SERVICE
ENGINE ­ Remove (B.10.A ­ F.10.A.10)
DIAGNOSTIC
ENGINE ­ Troubleshooting (B.10.A ­ G.40.A.10)
INDEX
The Chapter Index lists in alphabetical order all the types of information (called Information Units) that have been
written in that Chapter for that function or system on the machine.
INTRODUCTION
SECTION
A ­ Distribution Systems
B ­ Power Production
C ­ Power Train
D ­ Travelling
E ­ Body and Structure
F ­ Frame Positioning
G ­ Tool Positioning
H ­ Working Arm
X X X X X X X X
X X X X X X X X X
X X X X X X X
X X X
POWER PRODUCTION
ENGINE _ 10.A
87630288 1 6/6/2007
4
Find manuals at http://best-manuals.com/search?&s=NH-87639288
J ­ Tools and Couplers
K ­ Crop Processing
L ­ Field Processing
X X
X
3
4
5
6