Panasonic 1735 Technical Description page 16

Panasonic Electric Works Nordic AB
MEW01295 Rev: 2
LED indicator
(Depending on
L1
language, etc.
"Alarm")
L2 (Depending on
language, etc.
"Alarms queued")
L3 (Depending on
language, etc.
"Fire brigade
alerted")
L4 (Depending on
language, etc.
"Acknowledge")
L5 (Depending on
language, etc.
"Extinguishing")
(Depending on
L6
language, etc.
"Operation")
Technical Description Alert Annunciation Units 1735 & 1736, ver. 1.4.x
Table of LED indicators:
Colour Indicating
Blinking+
2 x Red
LED
"L6"
turned on
+ Buzzer
(interm.)
Blinking+
LED
"L3"
turned on
(no
buzzer).
Cont. (no
buzzer)
2 x Red Blinking
Red Cont.
Yellow Cont.
Red Cont.
Green Cont.
Off
NOTE! Regarding "L2", see also chapter "SW mode & Address
setting, page 16.
11
Indicating the same way as in the c.i.e. the AA unit is connected to, i.e. by
activated output(s) of the corresponding type or an activated input for the
LED respectively.
AA alarm (Acknowledge time starts.)
Fire alarm (i.e. not an AA alarm).
AA alarm(s) is/are acknowledged.
More than one alarm. Use push button
"P1" to scroll.
Output(s) for "Fire brigade tx" are
11
activated.
All AA alarms have been acknowledged
by the push button "P2" and new AA
alarms will be automatically acknow-
ledged.
Output(s) for "Extinguishing" are
11
activated.
The AA function is enabled.
The AA function is not enabled.
14