Sinamics G110M Converter - Siemens Sinamics G110M Getting Started

Description

2.2 SINAMICS G110M converter

2.2 SINAMICS G110M converter
Overview
The SINAMICS G110M system consists of the following components:
● Terminal Housing (including the Control Module)
● Power Module
● Three-phase motor.
The Power Modules are designed for a specific power range and the terminal housings are
designed to work with specific motors. The terminal housing not only allows the direct
mounting onto a motor but specific cable glands and mains connectors are specified. All the
various combinations of Power Modules, terminal housings (including the Control Modules)
and Options are given in the tables below.
Converter has the potential to start running of a PLC power-cycle
The converter has the potential to start running after a power-cycle of the controlling PLC, if
an ON command was present prior to the power-cycle of the PLC.
It is the users responsibility to ensure that the converter runs only when it is appropriate of
the user's application.
Table 2- 1
Frame size
FSA
FSA
FSA
FSA
FSB
FSB
FSB
Table 2- 2
Communications
USS
USS
USS
16
CAUTION
PM240M Power Modules - 3AC, 400 V, Class A, IP66
Rated output power
(kW)
based on High Overload (HO)
0.37
0.75
1.1
1.5
2.2
3.0
4.0
CU240M Terminal Housing (including the Control Module)
Motor frame size
FS71
FS80/90
FS100/112
Rated output current Article number
(A)
1.3 6SL3517-1BE11-3AM0
2.2 6SL3517-1BE12-3AM0
3.1 6SL3517-1BE13-3AM0
4.1 6SL3517-1BE14-3AM0
5.6 6SL3517-1BE16-3AM0
7.3 6SL3517-1BE17-7AM0
8.8 6SL3517-1BE21-0AM0
Mains / 24 V DC Article number
connections
Cable glands 6SL3544-0LB02-1BA0
Cable glands 6SL3544-0MB02-1BA0
Cable glands 6SL3544-0NB02-1BA0
Distributed converter for SIMOGEAR geared motors
Getting Started, 01/2016, FW V4.7.6, A5E36100338B AD