Renault CLIO 2019 Vehicle User Manual page 58

Table of Contents

Advertisement

chilD safETy: fitting a child seat, general information
in the rear side seat
A carrycot can be installed across the
vehicle and will take up at least two
seats. Position the child with his or her
feet nearest the door.
Move the front seat as far forward as
possible to install a rear-facing child
seat, then move back the seat in front
as far as it will go, although without al-
lowing it to come into contact with the
child seat.
For the safety of the child in the for-
ward-facing position:
– move the relevant seat backwards
as far as possible;
– move the seat in front of the child
forwards, and set the position of the
seatback to avoid contact between
the seat and the child's legs.
Ensure that the child seat
or the child's feet do not
prevent the front seat from
locking correctly. ➥ 1.21 or
➥ 3.31.
1.44
Always remove the headrest from the
rear seat on which the child seat is
positioned. ➥ 3.30. If necessary, posi-
tion the rear seat as far back as pos-
sible. This must be done before fitting
the child seat. Check that the child seat
is resting against the back of the rear
seat.
A child seat with floor sup-
ports must never be ins-
talled on the rear centre
seat. risk of DEaTh or
sErioUs inJUry.
When fitting a child seat
(Group 2 or 3 booster seat),
check that the seat belts
operate (wind) correctly:
➥ 1.23. If necessary, adjust the posi-
tion of the vehicle seat.
(2/2)
rear centre seat
Check that the belt is suitable for secu-
ring your child seat. Consult an appro-
ved dealer.
Fit the child seat in a rear
seat wherever possible.
Fitting a seat ISOFIX in the
rear-left seat means the
middle seat cannot be used. The
central seat belt will no longer be
either accessible or useable.
To install an ISOFIX seat in this
seat, detach the central seat belt by
hand before engaging the bolts.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents