Renault CLIO 2019 Vehicle User Manual page 180

lanE kEEPing assisT
3
operation
When the function is activated, the

warning light and the left and
right lines 3 are displayed in grey on the
instrument panel.
The function is set to operate when
the vehicle speed is between approxi-
mately 43 mph (70 km/h) and 112 mph

(180 km/h) and if the
light and 3 correction indicators are col-
oured white.
The function operates if the vehicle
breaches a line or if the vehicle ap-
proaches the roadside (divider, barrier,
pavement, embankment, etc.) without
the direction indicator lights being ac-
tivated.
2.48
(3/6)
In these cases:
– the function triggers an action on the
vehicle's steering system to correct
the vehicle trajectory;
– the 3 indicator on the side of the
breached line turns to yellow on the
instrument panel.
note: on bends, the function allows for
slightly cutting the bend.
If the corrective action on the steer-
ing system is not sufficient, the
warning light and 3 indicator on the side
of the breached line turn to red on the
instrument panel, accompanied by a vi-
bration on the steering wheel.
warning
special cases
When using the function:
– If the system can no longer detect
any action by the driver on the steer-
ing wheel, the
appears in orange on the instrument
panel, accompanied by the message
"Keeping hands on steering wheel"
and an audible warning.
The audible warning is emitted along

with the warning light and message
until the driver takes control;
– if the system is active for too long,
an audible warning is emitted along
with flashing of the side indicators 3
on the side of the vehicle concerned
until the driver takes control.
You can interrupt the trajectory cor-
rection at any time by moving the
steering wheel.

warning light