Deactivating The Parking Distance Control Manually; Parking Distance Control Automatic Deactivation; Parking Distance Control Operating Faults - Renault CLIO 2019 Vehicle User Manual

Parking DisTancE conTrol
7
10
vehicles not fitted with a multimedia
screen
– With the vehicle stopped, press the 7
switch as many times as required to
reach the "Vehicle" tab;
– press the 8 or 9 control repeatedly to
reach the "Settings" menu. Press the
switch 10 OK;
– press the 8 or 9 control repeatedly
to reach the "PARKING ASSIST"
menu. Press the switch 10 OK;
2.110
(5/5)
– select "BIP VOLUME" to adjust the
Park Assist volume using the 8 or 9
control.
Deactivating the parking
distance control manually
If towing, carrying or trailer equipment is
present in front of the ultrasonic detec-
tors, you must deactivate the system.
8
Parking distance control
automatic deactivation
9
The system deactivates:
– when the vehicle speed is above ap-
proximately 6 mph (10 km/h);
– depending on the model, when the
vehicle is stationary for more than
approximately 5 seconds and an ob-
stacle is detected (such as when in a
traffic jam, etc.);
– when the vehicle is in neutral for
manual gearboxes, or in position n
or P for automatic gearboxes.
operating faults
When the system detects an operating
fault, a beep sounds for approximately
three seconds each time reverse gear
is selected and the message "Check
parking distance control" appears on
the instrument panel. Consult an ap-
proved dealer.
An impact to the under-
side of the vehicle while
manoeuvring (e.g. strik-
ing a post, raised kerb or
other street furniture) may result in
damage to the vehicle (e.g. defor-
mation of an axle).
To avoid any risk of accident, have
your vehicle checked by an ap-
proved dealer.