Exit From Standby (Adaptive Cruise Control) - Renault CLIO 2019 Vehicle User Manual

sToP anD go aDaPTivE crUisE conTrol
Exit from standby
based on the stored cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road con-
ditions are suitable (traffic, road sur-
face, weather conditions, etc.). Press
switch 7 (RES/+) in the range of con-
firmed speeds.
When the stored speed is recalled, acti-
vation of the cruise control is confirmed
by the illumination of the cruising speed
in green.
note: if the stored speed is higher than
the current speed, the vehicle will ac-
celerate to reach that speed.
based on the current speed
When the cruise control is set to
standby, pressing switch 6 (SET/-) re-
activates the cruise control function
without taking into account the stored
speed: it is the speed at which the vehi-
cle is moving that is taken into account.
(7/13)
E
f
"Take control of the vehicle"
warnings
in some situations (e.g. coming upon
a much slower vehicle, vehicle in
front changing lanes quickly etc.), the
system may not have time to react.
Depending on the situation, the system
sounds a beep associated with:
– the orange alert E if the situation re-
quires the driver's attention;
or
– the red alert F accompanied by the
message "Brake", if the situation re-
quires the driver's immediate atten-
tion.
in all situations, react accordingly
and perform the appropriate ma-
noeuvres.
2.99