f
Locked Main Jet
The GP2928
carb uret or
uses a lock
ed main
jet
in order to
set min imum
f low rate of mix ture. The purpose
of setting
the
minimum
mixt
ure
fl
ow rate is
t
o
prevent
the
engine
f rom
overheat
ing result ing from the main
adjusting screw
which is tightened too much.
•
ENGINE MAINTENANCE·
Carburetion and Fuel System
The
main jet must be selected according to the temperature
and altitude of the area where the snowmobile is operated.
For
det ai
Is o
n the main jet replacement procedure, refer to
the
Technical
Service
Informat ion which will be published
later
o
n.
Plug screw
Main jet
Fig.8-19
Replacing the Locked Main Jet
Remove the plug screw.
To
remove, use a small slotted head screwdriver.
Fig.
8-20
Fig. 8-21
•
-61 -