Statistics; Traffic - TRENDnet PoE Web Smart Switch Series User Manual

TRENDnet User's Guide

Statistics

Statistics provide important information for troubleshooting switch problems at the port
level. The Web Management Utility provides a two statistics charts, including Traffic
Information and Error Information.

Traffic

System > Statistics > Traffic
1. Log into your switch management page (see
on page 5).
2. Click on System, click on Statistics, and click on Traffic.
3. View the Traffic Information Statistics.

InOctets: Inbound Octets (Bytes/s), number of inbound octet bits in bytes per
second.

InUcastPkts: Inbound Unicast Packets (Pkts), number of inbound unicast packets
in packets per second.

InNUcastPkts: Inbound Non-unicast Packets (Pkts), number of inbound non-
unicast packets (such as broadcast and multicast packets) in packets per second.

InDiscards: Inbound Discards (Pkts), number of inbound discarded packets in
packets per second.

OutOctets: Outbound Octets (Bytes/s), rate of outbound octet bits in bytes per
second.

OutUcastPkts: Outbound Unicast Packets (Pkts), number of outbound unicast
packets in packets per second.

OutNUcastPkts: Outbound Non-unicast Packets (Pkts), number of outbound
non-unicast (such as broadcast and multicast packets) packets.

OutDiscards: Outbound Discards (Pkts), number of outbound discarded packets.

Apply: Click the Apply button to clear port specific Traffic information.

Refresh: Click the Refresh button to update table with newest traffic
information.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"
4. At the bottom of the left hand panel, click Save.
5. Select the Config you would like to save the settings to, click Save Settings to Flash,
then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
PoE Web Smart Switch Series
36