Sony Ericsson StreamMan P800 User Manual page 165

This is the Internet version of the user's guide. © Print only for private use.
Once paired with a Bluetooth-enabled laptop, your P800 is
ready to make a connection to the Internet or corporate network.
Because Bluetooth is wire-free and requires no line-of-sight
alignment, you can place the laptop in a comfortable position
and let your P800 remain in your pocket, briefcase, or even be
placed up to 10 meters away.
If you wish to use an infrared link, the range is typically up to 1
meter. The two infrared ports must be kept in line of sight, at an
angle of no more than approximately 30 degrees.
The Dial-Up Networking Wizard
The wizard simplifies creating GPRS DUN connections by
setting the proper values in the PC DUN entry and linking the
entry to one of the GPRS configurations in your P800. You can
also view and modify the GPRS settings in the P800.
For HSCSD DUN entries, it updates the modem settings such
that the specified data rate and type of bearer (ISDN / Analogue)
will be used when you make a DUN connection.
You can view or change the DUN entries created with the
wizard using the standard Windows® DUN user interface.
The Dial-Up Networking Wizard software included in the
must be installed in your PC and your P800 must
Suite for P800
be connected to the PC via cable, infrared or Bluetooth wireless
technology. See "Connecting to other devices" on page 125
Getting started with Internet and Messages
Make sure that you have any information concerning, for
example, phone numbers, names of servers or domains, that the
server that you want to connect to may require.
To set up a GPRS or HSCSD (High-Speed Circuit Switched
Data) connection using the Dial-Up Networking Wizard
1. Start the
Dial-Up Networking Wizard
folder of the Start menu on your PC.
2. Choose Create a new Dial-Up connection.
3. Follow the instructions in the wizard.
To edit a previously created DUN entry
1. Start the
Dial-Up Networking Wizard
folder of the Start menu on your PC.
2. Modify a Dial-Up connection.
3. Select the desired connection from the list.
4. Follow the instructions in the wizard.
To define P800 as a modem
To set up a CSD (GSM Data) or HSCSD connection you will
need to install your P800 as a modem manually.
PC
To set up a Dial-Up entry for CSD or HSCSD
1. On the PC, open the Control Panel.
2. Choose to install a new modem.
from the Sony Ericsson
from the Sony Ericsson
165