Sony Ericsson StreamMan P800 User Manual page 148

This is the Internet version of the user's guide. © Print only for private use.
New Dial-Up or High-Speed Dial-Up account
Your Internet Service Provider (ISP) supplies you with your
, your , and their
name Password Phone number
dials to connect to the Internet. If you have a High-Speed Dial-
Up account with your network operator you can increase the
speed of your connection by making settings on the
under .
Advanced
TipTo avoid having to change the phone number when you
travel abroad: enter the international dialing prefix (for
example '+') and the appropriate country code for your ISP.
For some accounts you may also need to make advanced
settings.
148
User
, which your P800
tab
Speed
Select and enter settings on the tabs as described
Advanced
below
Dial-Up and High-Speed Dial-Up Advanced tabs
Log in The settings on this tab deal with IP and DNS
addresses. For an explanation of these settings, see
in the table "GPRS Advanced tabs" on page
Log in
146.
Script As an alternative to entering your user name and
password to access the Internet you may need to use a
login script stored on your P800. Although
uncommon, scripts may be required by your Internet
Service Provider (ISP). Select the
check box and enter the script text in the
If you select the check box
(required by some ISPs), the security of your
connection will decrease during the connection
process. Once you are connected, the security of your
connection will be restored.
Select the check box
• The login script of the account that you are setting
up requires that you input certain information or
you will need to respond to prompts from the
Internet account.
• You are connecting to a Dial-Up account that uses
Secure Access generated by a separate smart card
or password generator.
Proxy
For an explanation of these settings, see
table "GPRS Advanced tabs" on page 146 tabs.
Use login script
Script editor
Plain text authentication
Post connect terminal if:
Proxy in the
Control panel