Adding Images To Your Contacts; Ring Signals - Sony Ericsson StreamMan P800 User Manual

This is the Internet version of the user's guide. © Print only for private use.
The images can be JPEG, GIF (including animated), BMP,
WBMP, MBM or PNG format. Image format for the screen
saver is 208 x 320 pixels.
Note Using animated GIF uses more power.
Adding images to your
Contacts
You can store a picture with
each entry in Contacts. See
"Creating and managing
contacts" on page 97.
Pictures are easily taken using
the CommuniCam (see
"CommuniCam and Pictures"
on page 59) though of course
other images can be used.
If your network operator provides a CLI (Calling Line Identity)
service, your P800 can display the contact's picture together
with the other information when an incoming call is received
with a CLI matching that contact (not all numbers can be
displayed). The contact's picture is also displayed when you
make a call to that person.
Personalizing your P800
11:03
John Smith
+4613244500
End call
To show the contact's picture when receiving an incoming call
1. Select
Phone > Edit >Preferences > Incoming call picture
2. Select the
Show picture for incoming calls
3. Tap .
Done

Ring signals

Your P800 can play both iMelody format and polyphonic
ringsignals in WAV, AU, AMR, MIDI and RMF sound file
formats. When you choose a ring signal, your P800 will scan the
internal and Memory Stick storage and present you with a list of
ring signals that are in these formats. Recordings you have made
using Voice Memo can also be selected. Ring signals can be
added by downloading from the internet, beaming using infrared
or Bluetooth wireless technology file transfer from a PC and by
using Memory Stick. Extra ring signals can be found on the
Multimedia for P800 CD-ROM. You can add as many ring
signals as desired, subject only to available storage space.
TipVoice Memo recordings are listed as voicenote and a
number, for example voicenote1470.
A ring signal may be selected for an entry in Contacts, so that
the caller can be identified by the ring signal that is played. See
"To personalize the ring melody for a contact" on page 97.
Note The mobile network must provide the CLI (Calling Line
Identity) of the caller to enable the contact to be identified.
check box.
135