Sony Ericsson StreamMan P800 User Manual page 156

This is the Internet version of the user's guide. © Print only for private use.
MMS Advanced settings tabs
Receive
These settings apply to multimedia messages that you
receive.
Select the check boxes to send a notification message to the
sender when a message is:
• Delivered to you: Allow delivery notification
• Read by you: Allow read notification
You can filter reception of incoming messages by message
class ( Advertisements ,
sender ) as well messages from senders listed in Contacts.
Selecting a check box will filter out messages of that
category.
To receive multimedia messages only from senders listed
in your Contacts, select all other check boxes and clear the
check box for Anonymous senders.
Area tab
On the Area tab you make settings related to Cell Broadcast
Services. These include both Area Information and Cell
Information services. The availability of Cell and Area
Information services is operator dependent.
Your network may broadcast the area code as cell information.
Your P800 can to display it below the network name in the flip
closed standby view.
Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
156
Information, and Anonymous
To enable Cell Information
• Select the Cell Information check box
To turn Area Information on
• Check the check box. Received messages
Area Information
will be displayed and automatically stored in the
when dismissed.
Inbox
The list shows all the channels that you have defined on your
P800. The check box for each channel shows if it is on (checked,
ready to receive messages) or off (cleared, not active):
To add a new channel
1. Select .
New
2. Enter the number of the new channel in the New Channel
dialog. Channel numbers can be from 0 to 999. If there are
too many channels defined,
New
see a message:
Maximum channels on SIM
Channel numbering is operator dependent. Please consult
your network operator for information.
To turn a channel on or off
• Select the channel in the list and check the check box. To turn
it off, clear the check box.
Area Info
will be disabled and you will
.
Control panel