Saving Still Images; Saving Remote Party Pictures Automatically - Automatic Image; Capture Feature; Saving Still Images Using The Still Image Menu - Sony IPELA PCS-TL33 Operating Instructions Manual

Saving Still Images

When a "Memory Stick" is inserted beforehand, you can
easily store still images sent from the remote party or still
images from the local camera onto the "Memory Stick".
You can use the saved images for One Touch Dial buttons
and Phone Book.
Saving Remote Party Pictures
Automatically – Automatic Image

Capture Feature

The system automatically captures still images of the
remote party ten times every five seconds from the
beginning of each communication, and saves them in the
built-in memory. The still images stored in the memory are
retained until the next communication starts or the power
of the system is turned off.
This feature is activated when the "Memory Stick" is not
inserted.
Stored images can be used as thumbnail images for One
Touch Dial and the Phone Book.
Note
If it has taken a long time from dialing to establish the
connection, the first captured images may be black. This is
not a problem.
Saving Still Images Using the Still
Image Menu
1
Display the Still Image menu.
Click the menu bar display button to bring up the menu
selection screen. Then click "Still Image".
68
Saving Still Images
2
Click "Save".
Still Image
Send
Continuous Send
The picture on the display will be saved on the
"Memory Stick" as a still image.
Notes
• Do not remove the "Memory Stick" until the data is
completely loaded. If you do, the "Memory Stick" may
be damaged or the system may cause a malfunction.
• A still image file is saved as a new file. It will not be
overwritten.
When the write-protect tab on the "Memory Stick"
is set to "LOCK"
The message "Memory Stick write-protected" appears and
you cannot save the still image file.
When the memory of the "Memory Stick" is full
The message "Memory Stick full." appears and you cannot
save the still image file.
Image format that can be stored in a
"Memory Stick"
File name
The image file is saved under the directory named
"\DCIM\100MSDCF" with a file name as
"DSCXXXXX.JPG".
Compression format
This system compresses and records the recorded image
data in the JPEG (Joint Photographic Experts Group)
format. The file extension is ".jpg".
Notes
• This system is not compatible with progressive JPEG
format data.
• If a folder named with a larger number than 100 exists,
the image file is saved in that folder.
Zoom
Save
01:25