Lan (Connecting Through A Router); Lan (Connecting Through A Gatekeeper) - Sony IPELA PCS-TL33 Operating Instructions Manual

To conduct a video conference
Select "IP" for the line interface, enter the remote party's
IP address in the text box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
For details on the setting, see "Communication Mode
Menu" on page 29.

LAN (Connecting Through a Router)

Configuration example
LAN1
192.100.10.1
Router
192.100.10.10
Enter a name in "Host Name" under Page 1/3 of the LAN
Setup menu, set the "DHCP Mode" to "Off", and enter the
appropriate values for "IP Address", "Network Mask", and
"Gateway Address".
LAN
SIP
Right-click the mouse to display a help message.
The setting has been configured properly if the correct IP
address appears in the launcher menu.
Note
The information that appears in the launcher menu may
differ depending on the "Number Display" setting in the
Device Setup menu. You can also click the Number
Display portion and select the information to display from
a list.
44
Setting Up the Network Configurations
Virtual Private
Network (VPN)
192.100.20.1
Router
192.100.20.20
LAN
DHCP Mode Auto Off
Host Name VCT1
IP Address 192.100.10.10
Network Mask 255.255.255.0
Gateway Address 192.100.10.1
DNS Address
OK Cancel
IP:192.100.10.10
To conduct a video conference
Select "IP" for the line interface, enter the remote party's
IP address in the text box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
For details on the setting, see "Communication Mode
Menu" on page 29.
LAN (Connecting Through a
Gatekeeper)
Configuration example
LAN2
LAN1
192.100.10.1
192.100.10.10
User alias: PCS-A
User number: 100
1
Enter a name in "Host Name" under Page 1/3 of the
LAN Setup menu, set the "DHCP Mode" to "Off", and
enter the appropriate values for "IP Address",
"Network Mask", and "Gateway Address".
1/3
Right-click the mouse to display a help message.
2
Set "Gatekeeper Mode" to "On" under Page 2/11 of
the Administrator Setup menu, and enter the
appropriate values for "Gatekeeper Address", "User
Alias", and "User Number".
192.100.20.1
Router Router
Gatekeeper
192.100.10.20
192.100.20.20
User alias: PCS-B
User number: 200
LAN
LAN
DHCP Mode Auto
SIP
Host Name
VCT1
IP Address 192.100.10.10
Network Mask 255.255.255.0
Gateway Address 192.100.10.1
DNS Address
OK Cancel
IP:192.100.10.10
LAN2
1/3
Off