Pin Assignment On Optional Board Connectors; List Of Port Numbers Used On The Pcs-Tl33 - Sony IPELA PCS-TL33 Operating Instructions Manual

Pin Assignment on Optional Board
Connectors
RGB OUT connector (PCSA-DSM1)
5 1
10 6
15 11
Mini D-sub 15-pin (female)
Pin Signal
1 RED
2 GREEN
3 BLUE
4 NC
5 GND
6 RED. GND
7 GREEN. GND
8 BLUE. GND
9 NC
10 SYNC. GND
11 NC
12 NC
13 HSYNC
14 VSYNC
15 NC
List of Port Numbers Used on the
PCS-TL33
When connecting one-to-one (Default)
When "Port Number Used" is set to "Default" in the
Administrator Setup menu, the PCS-TL33 uses the
following port numbers.
Signal Port number
RAS (PCS-TL33) 1719 (using GateKeeper)
RAS 1718 or 1719 (using GateKeeper)
(GateKeeper)
Q.931 (dial) Any number from 2253 to 2255
Q.931 (answer) 1720
H.245 Any number from 2253 to 2255
Audio RTP 49152
Audio RTCP 49153
Video RTP 49154
Video RTCP 49155
Description
R (red)
G (green)
B (blue)
-
Ground
R (red) signal ground
G (green) signal ground
B (blue) signal ground
-
Sync signal ground
-
-
Horizontal sync
Vertical sync
-
Signal Port number
FECC RTP 49156
FECC RTCP 49157
Data conference 49158
RTP
Data conference 49159
RTCP
When connecting one-to-one (Custom:
TCP Port Number 3000 and UDP Port
Number 3100)
When "Port Number Used" is set to "Custom" in the
Administrator Setup menu, the PCS-TL33 uses the port
numbers defined by the values entered in "TCP Port
Number" and "UDP Port Number".
For example, when "TCP Port Number" is set to "3000"
and "UDP Port Number" is set to "3100", the PCS-TL33
uses the following port numbers.
Signal Port number
RAS (PCS-TL33) 1719 (using GateKeeper)
RAS 1718 or 1719 (using GateKeeper)
(GateKeeper)
Q.931 (dial) Any number from 3000 to 3002
Q.931 (answer) 1720
H.245 Any number from 3000 to 3002
Audio RTP 3100
Audio RTCP 3101
Video RTP 3102
Video RTCP 3103
FECC RTP 3104
FECC RTCP 3105
Data conference 3106
RTP
Data conference 3107
RTCP
Note
For the RTP and RTCP signals, ranges higher than the
ones listed above may be used when ports are unable to be
used properly.
119
Specifications