Lan (Connecting With H.460 Firewall Traversal) - Sony IPELA PCS-TL33 Operating Instructions Manual

party to connect to you, you must configure your router
settings. For details on router settings, consult with the
system administrator.
LAN (Connecting With H.460
Firewall Traversal)
You can use H.460 to traverse firewalls and conduct
conferences with terminals on other networks.
Configuration example
192.168.10.1
Router
192.168.10.10
1
Set "NAT/Firewall Traversal" to "On (H.460)" under
Page 3/3 of the LAN Setup menu.
LAN
SIP
Right-click the mouse to display a help message.
Note
You must set up the gatekeeper to use this function.
2
Enter a name in "Host Name" under Page 1/3 of the
LAN Setup menu, set the "DHCP Mode" to "Off", and
enter the appropriate values for "IP Address",
"Network Mask", and "Gateway Address".
46
Setting Up the Network Configurations
210.20.20.1
Internet
Router
Traversal
server
210.20.20.2
(Global address)
LAN
NAT/Firewall Traversal On(H.460)
OK Cancel
IP:012.345.678.912
Right-click the mouse to display a help message.
3
Set "Gatekeeper Mode" to "On" under Page 2/11 of
the Administrator Setup menu, and enter the
appropriate values for "Gatekeeper Address", "User
Alias", and "User Number".
3/3
Right-click the mouse to display a help message.
The setting has been configured properly if the correct
IP address appears in the launcher menu and
"Registration Confirmed" appears under
"Gatekeeper" in Page 3/4 of the Status & Info menu.
Note
The information that appears in the launcher menu
may differ depending on the "Number Display" setting
in the Device Setup menu. You can also click the
Number Display portion and select the information to
display from a list.
To conduct a video conference
Select "IP" for the line interface, enter the remote party's
IP address in the text box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
For details on the setting, see "Communication Mode
Menu" on page 29.
LAN
LAN
DHCP Mode
SIP
Host Name
VCT1
IP Address 192.100.10.10
Network Mask 255.255.255.0
Gateway Address 192.100.10.1
DNS Address
OK
Administrator Setup
Gatekeeper Mode On
Gatekeeper Address 192.100.10.20
PCS-A
User Alias
User Number 100
OK Cancel
1/3
Auto Off
Cancel
IP:192.100.10.10
2/11
IP:192.100.10.10