Installing The Data Solution Module - Sony IPELA PCS-TL33 Operating Instructions Manual

Installing the Data
Solution Module
Notes
• Be sure to turn the power to all components off before
starting the installation.
• When the Data Solution Module has been connected and
is used for the first time, the Video Communication
System may automatically upgrade the software of the
Data Solution Module. While the upgrading message is
displayed, never turn off the Video Communication
System, to prevent the possibility of serious system
damage.
1
Remove the rear cover.
Pull the cover off towards you.
2
Remove the DSM connector cover.
Connector cover
3
Connect the system connector of the Data Solution
Module to the DSM connector of the PCS-TL33 and
secure with fastening screws.
72

Installing the Data Solution Module

1
2
2
Mini D-sub 15-pin cable
(commercially available)
4
Replace the rear cover of the PCS-TL33.
Push the cover in while aligning the four stubs.
Connector
Projector or
similar