Test Port Insert - Fluke P3000 Series User Manual

Test Port Insert

1.800.561.8187
For devices with 1/8 BSP or NPT mounting threads, the diameter of the thread is very
close to the effective sealing diameter of the O-ring fitted to the test port.
This can make it difficult to achieve a good seal. When mounting these devices, use the
test port insert (stored in the spare seals container) as shown in Figure 2-6.
Table 2-1. Test Port Inserts - Parts List
Item
1 O Ring
2 Test Port Insert
3 O Ring
4 Test Port
To calibrate panel-mounted gauges with pressure connections in the rear, use an Angle
Adapter (see Chapter 8, Ancillary Equipment).
www.
Figure 2-6. Test Port Insert
Description Part
3865142
3919892
3883397
3921566
.com
1
2
3
4
information@itm.com
2
Preparation
Connections
gjn012.eps
2-5