Angle Adapter, P5543; Pointer Remover/Punch, P5551 - Fluke P3000 Series User Manual

P3000 Series
Users Manual

Angle Adapter, P5543

Pointer Remover/Punch, P5551

8-2
1.800.561.8187
To calibrate gauges with the pressure connection on the rear (e.g. panel-mount gauges) in
their correct position, an angle adapter should be used. The angle adapter fits directly
onto the test station, converting it through 90 degrees, allowing the standard adapters to
be used.
To remove and refit the pointer of a pressure gauge, a pointer remover/punch should be
used. This tool has a spring-loaded plunger to quickly and consistently refit the pointer.
Figure 8-3. Pointer/Remover Punch
www.
Figure 8-2. Angle Adapter
.com
gjn022.bmp
gjn023.bmp
information@itm.com