Item
PCU Assembly — 22 mm Nominal Diameter
Piston Cleaning
1.800.561.8187
Figure 5-3. PCU Assembly - 16 mm
Table 5-3. PCU Assembly - 16 mm - Parts List
Description
1
Piston
2
Bearing
3
Cylinder
1. The weight carrier is permanently attached to the piston; hold the weight carrier and
gently lift the piston (1).
2. Unscrew and remove bearing cap (3).
3. Carefully withdraw the piston from the cylinder (2).
4. Use "non-fluffing", non-abrasive, lint-free tissue or absorbent cloth. Hold the piston
by the weight carrier, and rub the tissue back and forth along its length.
5. To remove all traces of contamination, the piston can be cleaned in a suitable solvent.
O-ring seals (where fitted) are Nitrile rubber, and should not be
immersed in solvents, as they will become damaged. They
should be wiped carefully with a new tissue.
www.
Part
Item
Spec
4
3918063
5
Spec
6
W Caution
.com
Maintenance & Servicing
PCU Assembly — 22 mm Nominal Diameter
1
2
3
4
5
6
Description
Part
O Ring
3864766
Piston Stop
Spec
O Ring
3864954
information@itm.com
5
gjn33.eps
5-7