Specifications - Sony SLV-SE50EG Operating Instructions Manual

Specifications

System
Channel coverage
PAL (B/G, D/K)
VHF E2-E12, R1-R12
UHF E21-E69, R21-R69
CATV S1-S41, S01-S05
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
IInputs and outputs
: LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2 IN (SLV-SE70EN/SE70EG/SX70EN only)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phone jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-2 IN (SLV-SE50EG only)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phone jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
DECODER/... LINE-3 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
AUDIO OUT (SLV-SE70EN/SE70EG/SX70EN only)
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
82
Additional Information
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
22 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 100 314 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.6 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change
without notice.