Sony SLV-SE50EG Operating Instructions Manual page 75

This VCR (Recorder)
DECODER/
... LINE-3 IN
: Signal flow
Tip
• You can also use the LINE-1 (TV) connector instead.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected (SLV-
SE70EN/SE70EG/SX70EN only).
• If the other VCR is a stereo type, leave the red plugs unconnected (SLV-SE50EG
only).
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
How to connect to a stereo system (SLV-SE50EG
only)
Connect the LINE-2 IN AUDIO jack on this VCR to the audio output jacks
on the stereo system.
Other VCR (Player)
EURO-AV cable (not supplied)
TV
EURO-AV (Scart)
75
Editing