Sony SLV-SE50EG Operating Instructions Manual page 27

Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/–
buttons.
1
In step 7 above, press programme number button "0" twice to display
the number "00" beside CHANNEL SET.
2
Press MENU to exit the menu.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– or the programme number buttons to select the
programme position for which you cannot obtain a clear picture.
2
Press MENU, then select SETTINGS and press OK.
3
Select TUNER, then press OK.
4
Select FINE TUNING, then press OK.
The fine tuning meter appears.
TUNER
SYSTEM D / K
NORMAL / CATV NORMAL
CHANNEL SET C 2 7
PAY - TV / CANAL+ OFF
AFT
FINE TUNING
RETURN
SET :
5
Press ?// to get a clearer picture, then press MENU to exit the
menu.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
Selected programme
PROG. 4
position
EXIT : MENU
27
Getting Started