Step 4: Tuning Your Tv To The Vcr - Sony SLV-SE50EG Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected the VCR to your TV using the EURO-AV cable,
skip this step.
1
ON/STANDBY
2
RF CHANNEL
3
4
RF CHANNEL
14
Getting Started
I/u ON/STANDBY
RF CHANNEL
Press I/u ON/STANDBY to turn on the VCR.
Press RF CHANNEL on the VCR lightly.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
Press RF CHANNEL.
The TV system appears in the display window.
PROGRAM +/–