Sony SLV-N80 Operating Instructions Manual page 91

To cancel searching
Press H PLAY or x STOP.
To turn off the bar indication
Press DISPLAY again.
Notes
• The figure on the bar indication represents the total time length of the inserted tape as shown
below.
The total time length may not be displayed correctly for:
– Tapes other than T-60, T-120, or T-160.
– Tapes recorded in more than one tape speed mode.
Tape type
T-60 or shorter
from T-80 to T-140
T-160 or longer
• If you move the pointer (F) on the bar indication while searching, the VCR searches for the
new reset point.
• With the bar indication on, the M
commander work only for moving the pointer (F), while the M
buttons on the VCR are used for normal tape operation. Note, however, if you press these
buttons on the VCR, searching is canceled.
Total time length
SP LP EP
60 120 180
120 240 360
160 320 480
FF/ , and m
Searching for a selected point on the tape
REW/ < buttons on the remote
FF and m
REW
91