Sony SLV-N80 Operating Instructions Manual page 25

5 The TUNER PRESET menu appears. Set
ANTENNA/CABLE to ANT and press OK.
For details, see page 45.
6 The AUTO PRESET starts.
You have now completed hookup. If you want to use the VCR Plus+ or VCR Plus+
GOLD system for recording, go to the pages listed below.
For SLV-N80: Find the VCR Plus+ GOLD system Channel Listing in your program
guide. For details, see page 51. Then enter all channels you want to record and the
cable box output channel (usually 2, 3, or 4) as described on page 55.
For SLV-N70: Go to page 58 for VCR Plus+ system channel set up.
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you turn off
the VCR. "ACS" (Auto Clock Set) will flash in the display window and search for a
time signal provided by some TV channels. After that, whenever you turn off the
VCR, it checks the time and adjusts the clock, even for Daylight Saving Time.
To use the Auto Clock Set feature with this hookup, you need to manually select a
channel that carries a time signal:
1
Tune the cable box to a channel that carries a time signal.
2
Select AUTO in the CLOCK SET menu to turn on the Auto Clock Set feature.
3
Turn off the VCR. It automatically sets the clock and adjusts for Daylight Saving
Time by picking up the time signal.
If you want to use the timer to record right away, or if the channels in your area do not
carry time signals, set the clock manually. For details, see page 36.
Notes
• To use the Auto Clock Set feature, leave the cable box on.
• If the clock is not set, "ACS" will flash in the display window whenever the VCR is turned
off. During this time, the VCR will search for a time signal.
SET UP
TUNER PRESET CH 2 4
AUTO PRESET
PROCESSING
PLEASE WAIT
SET UP
TUNER PRESET
ANTENNA / CABLE ANT
CABLE
SELECT :
NEXT : OK
CANCEL : EASY SET UP
SET UP
SET UP IS DONE
Normal display
Hookups
25