Sony SLV-N80 Operating Instructions Manual page 14

Hookup 2 (SLV-N80 only)
Connecting to a digital satellite receiver
Recommended use
Use this hookup if you have a digital satellite receiver that is compatible with the
Cable Mouse. It allows the VCR's cable box control feature to control the channel on
the digital satellite receiver, simplifying the recording process. A list of compatible
digital satellite receivers is on page 42.
What you can do with this hookup
• Record any channels by using the Cable Mouse to select channels on the digital
satellite receiver
What you can't do
• Record with the digital satellite receiver turned off
• Record any channels from cable or an antenna (To record channels from cable or
an antenna, turn off the cable box control feature.)
• Use a cable box
• Record programs with the VCR Plus+ GOLD system
Wall
or
14
Hookups
VCR
PLUG IN
( )
VHF/UHF
POWER
AUDIO VIDEO
CABLE BOX
IN
CONTROL
LINE-1
CONTROL S
IN
OUT
OUT
LINE
OUT
RM-CM101
Cable
Mouse
(not supplied)
VHF/UHF
LINE
IN
OUT
OUT
AUDIO VIDEO
Digital satellite
receiver
Rear of TV
VHF/UHF
Match the
A
type of
connector on
or
your TV: A,
VHF
B, or C.
B
For connector
UHF
or
types B and
VHF
C, no UHF
connection is
C
required.
UHF
Positioning the Cable Mouse
Place the Cable Mouse so that it
hangs out over the front of the
remote sensor on the digital
satellite receiver.
Side view