Connector Panel - Sony HDW-D2000 Operation Manual

2-2 Connector Panel

Cooling fan
1 Analog audio input/output
section
8 Audio monitor signal output section
(see page 2-18)
1 Analog audio input/output section
1 AUDIO INPUT CH1 to CH4 connectors
2 AUDIO INPUT CH1 to CH4 LEVEL switches
AUDIO INPUT
CH1 CH2 CH3
LEVEL LEVEL
LOW HIGH LOW HIGH LOW
ON ON
OFF OFF OFF
600Ω 600Ω
AUDIO OUTPUT
CH1 CH2 CH3
4 CUE IN/OUT connectors
3 AUDIO OUTPUT CH1 to CH4 connectors
1 AUDIO INPUT CH1 to CH4 (channels 1 to 4)
connectors (XLR 3-pin, female)
Input analog audio signals to channels 1 to 4.
You can record analog audio signals input to these
connectors to any audio track on the tape.
2 Analog video input/output section (see page 2-16)
75Ω
7 Time code input/output
section (see page 2-18)
CUE
CH4 IN
LEVEL LEVEL LEVEL
HIGH LOW HIGH LOW HIGH
ON ON ON
OFF OFF
600Ω 600Ω 600Ω
CUE
CH4 OUT
3 Digital audio input/output section (see page 2-16)
6 External device connectors (see page 2-17)
2 AUDIO INPUT CH1 to CH4 (channels 1 to 4)
LEVEL switches
Set these for each channel as shown in the following
table, according to the audio input levels to the
AUDIO INPUT CH1 to CH4 connectors and the
impedance.
AUDIO INPUT CH1 to CH4 LEVEL switch settings
Audio input level and impedance
Level
–60 dBu
(microphone input)
+4 dBu High impedance
(line audio input) (approx. 20 kΩ)
600 Ω
+4 dBm
(line audio input)
3 AUDIO OUTPUT CH1 to CH4 (channels 1 to 4)
connectors (XLR 3-pin, male)
These connectors output analog audio signals for
channels 1 to 4.
4 CUE IN/OUT (cue audio input/output)
connectors (XLR 3-pin, female/male)
The IN connector inputs and the OUT connector
outputs the cue audio signals.
Chapter 2 Location and Function of Parts
4 Digital signal input/
output section (see
page 2-17)
Cooling fan
5 Power supply section
(see page 2-17)
Switch setting
Impedance
High impedance
LOW-OFF
(approx. 20 kΩ) (left position)
HIGH-OFF
(center position)
HIGH-ON 600Ω
(right position)
2-15