Sony HDW-D2000 Operation Manual page 130

Menu items in the range 900 to 999, relating to digital processing (continued)
Item number Item name
955 LIMITER (UC)
(Invalid in 24PsF or
23.98PsF mode)
956
CRISP THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode)
957 LEVEL DEPEND
THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode)
958 H DETAIL FREQUENCY
(UC)
(Invalid in 24PsF or
23.98PsF mode)
959 H/V RATIO (UC)
(Invalid in 24PsF or
23.98PsF mode)
GAMMA LEVEL (UC)
960
(Invalid in 24PsF or
23.98PsF mode)
961 BACKGROUND COLOR
(UC)
(Invalid in 24PsF or
23.98PsF mode)
Settings
Carry out the up-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
Carry out the up-converter image enhancer adjustment. Set the threshold
amplitude at which low amplitude signals are not emphasized.
0 to 8 to FH
Carry out the up-converter image enhancer adjustment. Set the luminance range
for edge enhancement.
0 to 8 to FH
Carry out the up-converter image enhancer adjustment. Set the central frequency
and frequency characteristic for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz : 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
Carry out the up-converter image enhancer adjustment. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
Carry out the up-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
Set the color of the part where no material exists (background) for up-converting.
BACKGROUND COLOR: Set the color.
BLACK: Black
GRAY: Gray
BLUE: Blue
TABLE: Set with the following Y/P
Y TABLE: Adjust the background Y level.
0 to FFH
B-Y TABLE: Adjust the background B–Y level.
0 to 80 to FFH
R-Y TABLE: Adjust the background R–Y level.
0 to 80 to FFH
/P tables.
B R
Chapter 10 Setup Menus
10-33