Sony HDW-D2000 Operation Manual page 110

Menu items in the range 100 to 199, relating to the control panels (Continued)
Item number Item name
135 TELE-FILE THREAD
COUNTER CLEAR MODE
136 TELE-FILE IN OUT INPUT
CONTINUE
139 LOST LOCK DISPLAY ON
CONTROL PANEL
Menu items in the range 200 to 299, relating to the remote control interface
Item number Item name
PARA RUN
201
202
CF FLAG (Valid only in
50i or 25PsF mode)
211 REMOTE1 PORT
Settings
Select whether to clear the thread counter when formatting a Tele-File.
NOT CLEAR : Do not clear the thread counter.
WHEN FORMAT: Clear the thread counter.
Select whether to continuously input log (IN and OUT point) data in the Tele-File
menu screen.
OFF : Do not continuously input log (IN and OUT point) data.
ON: Continuously input log (IN and OUT point) data.
Select whether or not to display a "LOST LOCK" indication on the control panel
when the lock is lost.
OFF : No display on control panel for LOST LOCK.
ON: Display on control panel for LOST LOCK.
Settings
Select whether or not to use synchronized operation for two or more VTRs.
DIS : No synchronized operation
ENA: Use synchronized operation
Note
To use synchronized operation for two or more VTRs, set item 201 to "ENA" on
all of the VTRs.
Select the mode for locking to the color framing sent from the remote controller.
8F : Eight-field locking mode
4F/8F: Four- or eight-field locking mode
Select how to use the REMOTE 1-IN(9P) and REMOTE 1-OUT(9P) connectors
on the connector panel.
I&O : Both the IN and OUT connectors are effective whether in local or remote
mode.
IN: Only the IN connector is effective whether in local or remote mode.
OUT: Only the OUT connector is effective whether in local or remote mode.
PANEL: Allows you to select i&o, in, or out using the function menu.
Note
When selecting "PANEL", first define user-defined function key RMT1 in the
HOME2 page.
On how to define user-defined function keys in the HOME2 page, refer to the
Maintenance Manual Volume 1.
(Continued)
10-13
Chapter 10 Setup Menus