Sony HDW-D2000 Operation Manual page 129

10-4 Items in the Extended Setup Menu
Menu items in the range 900 to 999, relating to digital processing (continued)
Item number Item name
935 DETAIL GAIN (DC)
(Invalid in 24PsF or
23.98PsF mode)
936 LIMITER (DC)
(Invalid in 24PsF or
23.98PsF mode)
937 CRISP THRESHOLD (DC)
(Invalid in 24PsF or
23.98PsF mode)
LEVEL DEPEND
938
THRESHOLD (DC)
(Invalid in 24PsF or
23.98PsF mode)
939 H DETAIL FREQUENCY
(DC)
(Invalid in 24PsF or
23.98PsF mode)
940 H/V RATIO (DC)
(Invalid in 24PsF or
23.98PsF mode)
941 GAMMA LEVEL (DC)
(Invalid in 24PsF or
23.98PsF mode)
942 V FILTER SELECT
(Invalid in 24PsF or
23.98PsF mode)
943 CROSS COLOR CRISP
(Invalid in 24PsF or
23.98PsF mode)
950 UP CONVERTER MODE
(Invalid in 24PsF or
23.98PsF mode)
951 H CROP POSITION
(Invalid in 24PsF or
23.98PsF mode)
LETTER BOX POSITION
952
(UC)
(Invalid in 24PsF or
23.98PsF mode)
953 UP CONVERTER
PROCESS SELECT
(Invalid in 24PsF or
23.98PsF mode)
954 DETAIL GAIN (UC)
(Invalid in 24PsF or
23.98PsF mode)
10-32
Chapter 10 Setup Menus
Settings
Carry out the down-converter image enhancer adjustment. Adjust the sharpness
of edge emphasis.
0 to 20H to 7FH
Carry out the down-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
Carry out the down-converter image enhancer adjustment. Set the threshold
amplitude at which low amplitude signals are not emphasized.
0 to FH
Carry out the down-converter image enhancer adjustment. Set the luminance
range for edge enhancement.
0 to 8 to FH
Carry out the down-converter image enhancer adjustment. Set the central
frequency for edge enhancement.
2.6MHz to 3.4MHz to 3.9MHz to 4.6MHz
Carry out the down-converter image enhancer adjustment. Set the horizontal/
vertical ratio for edge enhancement.
0 to 3 to 7
Carry out the down-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
Set the vertical interpolation filter coefficient for HD-SD converter output.
The vertical resolution increases as the setting grows larger.
1 to 3
Set the cross color crisp level for HD-SD converter output.
0 to 4 to FH
Select the up-converter mode.
crop : Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
Adjust the "H-crop" (the horizontal position when inserting in the edge crop mode)
of the up/down converter output when menu item 950 is set to crop.
–120 to 0 to 120
Adjust the vertical position of the letter box mode cutout in up-converter output
when l-box is selected in menu item 950.
–120 to 0 to 120
Select the original picture to use when converting SD to HD.
FIELD: Use field picture.
FRAME: Use frame picture.
adapt (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
adap2 (still picture priority mode): Set the ratio of converting from frames
higher when up-converting.
adap3 (motion priority mode): Set the ratio of converting from fields higher
when up-converting.
Carry out the up-converter image enhancer adjustment. Adjust the sharpness of
edge emphasis.
0 to 40H to 7FH
(Continued)