Sony HDW-D2000 Operation Manual page 123

10-4 Items in the Extended Setup Menu
Menu items in the range 700 to 799, relating to video control (Continued)
Item number Item name
726 H BLANKING WIDTH
(Invalid in 24PsF or
23.98PsF mode)
727 VIDEO EDIT PREVIEW
SWITCHER
728 OUTPUT SCH PHASE
(Invalid in 24PsF or
23.98PsF mode)
732 COMPOSITE MODE
(Invalid in 24PsF or
23.98PsF mode)
MASTER LEVEL (HD)
740
741 Y LEVEL (HD)
742 P LEVEL (HD)
B
743 P LEVEL (HD)
R
745 SETUP LEVEL (HD)
746 SYNC PHASE (HD)
747 FINE (HD)
10-26
Chapter 10 Setup Menus
Settings
Select the horizontal blanking width of the video output signal.
NAROW : Digital blanking (narrow)
WIDE: Analog blanking (wide)
When WIDE is selected, the horizontal blanking width complies with RS170A, and
normally the blanking is widened and the image becomes narrower. It is
recommended to select NAROW at the editing stage, then later, for broadcast
transmission to select WIDE, to output a signal conforming to the standard.
Set the output phase for the video playback signal when any of the ASSEMBLE,
VIDEO, AUDIO CH1 to CH4, CUE and TC buttons is lit.
INT : The video playback signal output phase is the same as the output phase in
E-E mode. Use this setting when editing with a single VTR, or when
previewing while watching the VTR output signal.
EXT: The video playback signal output phase is the same as the phase of an
input video signal or external reference signal.
Set the subcarrier H phase.
0 to 800H to FFFH
Select the chroma filter through which the composite video output signals pass.
WIDE : Output via SMPTE wide
STD: Output via SMPTE standard (narrow)
Adjust the high-definition video signal output from the HDSDI OUTPUT
connector.
This adjusts the Y, P , and P
B R
0.0%(0H) to 100% (800H) to 141.3% (B4EH)
Adjust the Y level of the high-definition video signal output from the HDSDI
OUITPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
Adjust the P level of the high-definition video signal output from the HDSDI
B
OUTPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
Adjust the P level of the high-definition video signal output from the HDSDI
R
OUTPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
Adjust the setup level (59.94i, 29.97PsF mode)/black level (50i, 25PsF mode) of
the high-definition video signal output from the HDSDI OUTPUT connector.
0 to 110H to 220H
Control the H sync phase of the high-definition video signal output from the
HDSDI OUTPUT connector according to the menu.
0 to 80H to FFH
Fine control the H sync phase of the high-definition video signal output from the
HDSDI OUTPUT connector according to the menu.
0 to 3FFH
levels simultaneously.