Auto Mode (Auto Function) Execution Menu - Sony DVCAM DSR-1500 Operating Instructions Manual

Auto Mode (AUTO FUNCTION) Execution Menu

The following table shows the purpose and function of the
items in the auto mode execution menu.
Menu contents
SDTI DUBBING [SDTI DUB]: Selection of data for SDTI
dubbing
For dubbing through the SDTI (QSDI) interface, select data that
the dubbing applies to.
i.LINK DUBBING [i.LINK DUB]: Selection of data for i.LINK
dubbing
For dubbing through the i.LINK interface, select data that the
dubbing applies to.
TC INSERT [TC insert]: Time code rewriting
Rewrite the time code from an initial value which can be set
freely.
For details of the use of individual items, see "Digitally
Dubbing Signals in DVCAM Format" on page 51 and
"Rerecording the Time Code—TC Insert Function" on
page 47.
Settings
A/V [> A/V]: Dub the audio and video.
A/V/TC [> A/V/TC]: Dub the audio, video, and time code.
A/V/TC/CM [> A/V/TC/CM]: Dub the audio, video, time code,
and cassette memory contents.
Note
When A/V is selected, the time code recorded follows the
setting of the TIME CODE menu items (see page 62) in the
setup menu.
Settings
A/V [> A/V]: Dub the audio and video.
A/V/TC [> A/V/TC]: Dub the audio, video, and time code.
A/V/TC/CM [> A/V/TC/CM]: Dub the audio, video, time code,
and cassette memory contents.
Note
When A/V is selected, the time code recorded follows the
setting of the TIME CODE menu items (see page 62) in the
setup menu.
Settings
71
Menu Contents