Audio Dubbing - Sony 2-678-737-13(1) Operating Instructions Manual

Audio Dubbing

You can record just sound on a recorded tape.
(Audio dubbing)
Notes
• You can dub the sound onto a DVCAM-formatted
tape recorded in the 32 kHz audio mode (4-channel/
12 bits) only. You cannot dub the sound on a tape in
the 48 kHz audio mode (2-channel/16 bits). If the
audio mode of the recorded tape is 32 kHz, you can
dub the sound regardless of [AUDIO MODE] setting
in [AUDIO SET] menu.
For details on "AUDIO MODE," see "AUDIO SET"
menu on page 73.
• The sound is dubbed only onto channels 3/4.
You cannot dub the sound onto channels 1/2.
Connection of external devices
The following shows an example of a basic connection
for audio dubbing.
Sound source
Audio output
Monitor
When an HDMI cable is used for connection, Audio
cable connection is not necessary.
60
Chapter 4 Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer
HVR-M25 (rear panel)
AUDIO INPUT
Audio
input
AUDIO OUTPUT
Video
VIDEO OUTPUT
input
HVR-M25
(front panel)
Headphones
PHONES
: Signal flow