Playback
This section describes the connections and settings for
the playback and functions such as playback at various
speeds and searching for a specific scene on a recorded
tape.
Connections for Playback
Connecting the unit to a monitor without
an i.LINK jack
You can connect the unit to video monitor without an
i.LINK jack. Use the unit as follows.
Monitor
When an HDMI cable is used for connection, Audio
cable connection is not necessary.
S-video input
Video input
Audio input
HDMI input
Component video input
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (Phono jack) (not supplied)
HDMI cable (not supplied)
Component video cable (not supplied)
HVR-M25 (rear panel)
: Signal flow
Chapter 2 Playback and Recording
(Continued)
33