Setting The Time Code And User Bits; Using The Internal Time Code Generator - Sony 2-678-737-13(1) Operating Instructions Manual

Setting the Time Code and User Bits

The unit can set, display, record and play back the time
code and user bits.
Notes
• When HDV signals are recorded from HDV/DV
jack on the unit, user bits are copied automatically.
However, these bits cannot be preset. The time code
is set in accordance with [TC MAKE] setting. To
copy the time code of a source tape, set [HDV/DV IN
TC] in [TC/UB SET] menu to [EXTERNAL]
(page 76).
• When images recorded in DVCAM/DV format are
input via HDV/DV jack, you can preset a user bit
time code on the unit. To copy the user bit and time
code of a source tape, use [DUPLICATE PLUS]
(page 74).
• For a tape recorded both in HDV and DVCAM/DV
formats, the time code may become garbled at a
connecting portion between scenes on the tape.
• If you play back an HDV tape without signals
recorded, the time cord may become disordered.
• The time code and user bits cannot be reset on the
unit from with Remote Commander equipped with a
counter reset function.
Using the Internal Time Code
Generator
You can set the initial time code value generated by
the internal time code generator. In addition, you can
set the user bits to record data such as the date, time,
scene number, reel number, or other useful
information. The time data settings are set by using the
menu.
Setting the Time Code
For details on the menu, see "Chapter 5 Adjusting and
Setting Through Menus" on page 65.
To set the initial time code value
This section describes how to set the time code's initial
value.
Note
To set the initial time code value, you need to set [TC
MAKE] in [TC/UB SET] menu to [PRESET]
beforehand.
For details on [TC MAKE], see "TC/UB SET" menu on
page 76.
1
Press MENU button to display the menu.
For details on the menu, see "Operating the Menus" on
page 65.
(You can set [TC FORMAT] only when [60i/50i
SEL] in [OTHERS] menu is set to [60i].)
Chapter
TC/UB SET
TC PRESET
UB PRESET
HDV/DV IN TC
TC RUN
TC MAKE
TC FORMAT
[ MENU ] : END
Chapter 3 Setting the Time Code
3
(Continued)
49