Using The Unit As A Videocassette Recorder; Connections For Recording - Sony 2-678-737-13(1) Operating Instructions Manual

Using the Unit as a Videocassette Recorder

This section describes the connections, settings and
operations necessary to perform recording on the unit.
The same settings and operations apply whether you
are using the unit for dubbing.
Notes
• For connection of the editing devices, refer to the
instruction manual of the editing controller and that
of the editing software you use.
• Edit functions are specified by the editing software.
For details on the editing methods, refer to the
instruction manual of the editing software.
For details, see also page 62 and 63.

Connections for Recording

To video equipment without an i.LINK jack
You can connect the unit to video equipment without
an i.LINK jack. Use the unit as a recorder as follows.
Player
Connect either an S-video cable or a video cable.
Monitor
S-video output
Video output
Audio output
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (phono jack) (not supplied)
HVR-M25
(rear panel)
: Signal flow
Chapter 2 Playback and Recording
Monitor
(Continued)
43