Sony 2-678-737-13(1) Operating Instructions Manual page 28

Displaying Various Data
(b) When AUDIO OUTPUT SELECT switch is set to
MIX
AUDIO
AUDIO MONI:
[ STATUS CHECK
(The mixed level of channels 1 and 3 is displayed on
CH1/3; that of channels 2 and 4 is displayed on CH2/4.
The audio output level becomes 50% (–6 dB) of the
original audio levels.)
(c) When the unit is in the audio dubbing mode and
AUDIO OUTPUT SELECT switch is set to CH-1/2
or CH-3/4
AUDIO
AUDIO MONI:
STATUS CHECK
[
(The levels of playback sound are displayed on CH1 and
CH2. The levels of input sound to be dubbed are
displayed on CH3 and CH4. When AUDIO OUTPUT
SELECT switch is set to MIX, the mixed level of the
pair of channels 1 and 3 and that of channels 2 and 4 is
displayed. The audio output level becomes 50% (–6 dB)
of the original audio levels on each channel. In this case,
the meters are as illustrated in (b) on this page. To check
only the sound to be dubbed before dubbing, press
AUDIO DUB button while the unit is in the stop mode.
The level meters fluctuate only when the channels
(channel 3 and 4) are selected for audio dubbing.)
Note
In EE, recording, or audio dubbing (only the channels
used to dub) mode, if the input levels exceed 0 dB, the
portions of the meters turn red. (However, when the
audio mode is set to 32 kHz (4-channel,12 bits),
whereas AUDIO OUPUT SELECT switch is set to
MIX, the mixed audio levels that exceed 0 dB do not
turn red.) During playback or while HDV/DV signals
are input, the levels meters do not turn red.
28
Chapter 1 Overview
1/4
CH1 , CH2
] : END
1/4
CH1 , CH2
: END
]
OUTPUT screen
OUPUT screen is displayed when STATUS CHECK is
set to [OUTPUT].
You can confirm the setting values of [HDV/DV SEL]
in [IN/OUT REC] menu, [HDMI/CMPNT] and
[DOWN CONVERT] of [VIDEO OUT], and [HDV
t DV CONV] and [DOWN CONVERT] of [i.LINK
SET] in [IN/OUT REC] menu.
For details on OUTPUT settings, see "IN/OUT REC" menu
on page 67.
OUTPUT
HDV/DV SEL :
VIDEO OUT
HDMI/CMPNT :
DOWN CONVERT : SQUEEZE
i.LINK SET
HDVpDV CONV :
DOWN CONVERT : SQUEEZE
[ STATUS CHECK
ASSIGN screen
ASSIGN screen is displayed when STATUS CHECK
is set to ASSIGN.
You can confirm the setting values of [ASSIGN BTN]
in [OTHERS] menu.
For details on ASSIGN buttons, see "ASSIGN BTN" on
page 77.
ASSIGN
ASSIGN [ A1 ] :
ASSIGN [ A2 ] :
ASSIGN [ A3 ] :
[ STATUS CHECK
CUSTOM REPEAT screen
CUSTOM REPEAT screen is displayed when
STATUS CHEK screen is set to [CUSTOM
REPEAT].
The settings of [CUSTOM REPEAT] in [VTR SET]
menu are displayed. While CUSTOM REPEAT is in
progress, you can also confirm the current status of
CUSTOM REPEAT.
1
CUSTOM REPEAT
REMAINING :
2
REPEAT TIMES :
REPEAT CYCLE :
3
START TIME :
2006 5 1 12 : 00 : 00
4
[ STATUS CHECK
2/4
AUTO
1080i / 480i
OFF
] : END
3/4
INDEX MARK
COUNT. RESET
AUDIO DUB
] : END
4/4
sc
5h20min
07/99
23min/60min
12 : 34
5
] : END