Using The Unit As A Recorder With Fxe-100/100P/120/120P - Sony DSR-40/40P Operating Instructions Manual

Using the Unit as a Recorder with FXE-100/100P/120/120P

Audio output
Player
Audio output Video output
This unit can be used as a recorder with the FXE-100/100P/120/120P.
However, editing accuracy will not correspond with the RS-422A standard
in the editing system.
For details on usage and connections, refer to the operating manuals
supplied with your devices used in a system.
Notes
When using this unit as a recorder:
• You cannot execute video/audio insert editing.
• When you use the unit as a recorder with the FXE-120/120P, only
assemble editing is available.
• Adjust the edit timing (See page 40).
• Set RECORDER MODE to FXE RECORDER.
• When you use the unit as a recorder with the FXE-100/100P, the FXE-
KIT1 is required for upgrading the FXE-100/100P.
• Editing accuracy is not guaranteed. If the duration is very short, the
recording may not function properly.
• Be sure to execute the LEARN function. If you do not use the unit for a
long time, you have to execute the function also.
• If you execute REC command via RS-422A, it delays the recording start
time for about five minutes.
• Set RECORDER to OTHERS in the SETUP menu item 102 (112: when
using the FXE-100/100P that has been upgraded with the FXE-KIT1)
REMOTE INTERFACE of the FXE-120/120P.
When using this unit as a recorder with the FXE-100/100P (that
has been upgraded with the FXE-KIT1)
LANC
DSR-200A/200AP
Video output
RS-422
Ref.
Input
Video input
Audio input
Video input
Audio input
RS-422
IF-FXE2
Audio/Video
output
RS-422
PGM
video
FXE-100/100P
output
+
FXE-KIT1
PGM audio output
Chapter 4 Using the Unit as a Recorder in an Editing System
DSR-40/40P
DUP
COUNTER AUDIO
INPUT TIMER
SELECT MONITOR REMOTE
SELECT
TC CH-1/2 REPEAT
MENU
COUNTER MIX OFF
TAPE CH-3/4 REC
REMAIN LOCAL
SET
49 GB