Martin Audio SX110 User Manual page 80

SX SERIES USER GUIDE
SXP218
Next the SX218GRIDi should be attached to the two chain hoists that are being used to suspend the sub array. One point is required at
the front and a second at the back. The hooks on the hoists can be attached using the two 3.25T Shackles supplied with the grid. Fly
the grid out to a height so you can move the SXP218 under it then lower the grid to line up the fixing holes on the grid with those on the
brackets on the sub.
Join using the four M10 x 50 button head screws and washers supplied with the grid assembly. The sub can now be safely flow to the
desired height.
80
Copyright © 2019 Martin Audio Ltd. SX SERIES USER GUIDE V1.0