Introduction; Accessories - Martin Audio SX110 User Manual

SXF115
SXF115

Introduction

The SXF115 is a passive subwoofer designed to extend the performance of Martin Audio WPM and MLA Mini systems down to 42Hz.
Featuring a powerful, long excursion 15" (380mm)/4" (100mm) voice coil driver in a very compact bass reflex enclosure, it can be flown
as part of a WPM or MLA Mini array, or ground-stacked separately.
The design of the 15" driver maximises output while minimising power compression and distortion, and four reflex ports reduce air noise at
very high output levels. The SXF115 enclosure is constructed from multi-laminate birch ply, finished with a durable polyurethane coating
and equipped with a perforated steel grille, skids and twin bar handles. An M20 threaded fitting in the top surface facilitates pole-mounting
of up to 4 WPM or MLA Mini enclosures.
Being a passive subwoofer, the SXF115 is ideal for flown WPM or MLA Mini fixed installations where ground-based, rack-mount amplification
is preferred — either for ease of servicing, increased IP protection, or reduced visible cabling in the air.
When used with a WPM or MLA Mini array, Martin Audio iKON amplifiers or the MSX rack-mount power plant respectively deliver the
correct drive characteristics to the SXF115, with onboard DSP presets for a variety of system configurations. Cardioid operation can be
achieved by arranging the SXF115 in forward and rear-facing pairs.
By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Accessories

Install flying frame ASF20054
Touring flying frame ASF20064 (includes inclinometer & shackles)
Transition grid WPMMSXGRID
Ground stack base plate ASF20062
Wheelboard and cover ASF17025
Wind-up pole ASF20071
Weather kit WRKIT
Copyright © 2019 Martin Audio Ltd.
20
SX SERIES USER GUIDE
SX SERIES USER GUIDE V1.0