Table of Contents
Advertisement
•
Use the Product only as specified or hazardous laser
radiation exposure can occur.
To prevent damage to the Product or cables under test and to
prevent data loss, read all safety information given in all
documentation supplied with the Product.
Connectors, Keys, and LEDs
A
N
M
L
LCD display with touchscreen.
Singlemode output port with removable connector adapter
and dust cap. This port transmits optical signals for loss and
length measurements.
The LED below the output port is red when the port transmits
1310 nm and green for 1550 nm.
Input port with removable connector adapter and dust cap.
This port receives optical signals for loss, length, and power
measurements.
Multimode output port with removable connector adapter and
dust cap. This port transmits optical signals for loss and length
measurements.
The LED below the output port is red when the port transmits
850 nm and green for 1300 nm.
Universal fiber connector (with dust cap) for the visual fault
locator. The connector accepts 2.5 mm ferrules. The LED below
the connector shows the locator's mode.
Button to manually control the output ports (
the visual fault locator (
B
C
D
K
J
Figure 1. Connectors, Keys, and LEDs
Caution
W*
E
F
O
G
P
H
I
).
B
W*
C
D
K
J
and
E
F
G
I
HGP00.EPS
) and
- Quick Links:
- How to Certify Fiber Optic Cabling
Hide quick links:
Advertisement
Table of Contents
